Dispositivos tecnológicos en orden Picking System: Revisión bibliográfica

Autores/as
DOI:
https://doi.org/10.47456/bjpe.v8i6.39192
Palabras clave:
depósito, tecnología, innovación, : preparación de pedidos
Resumen

Debido al comportamiento cambiante de los consumidores, el almacén ha recibido una gran demanda de pedidos. La actividad de elección y recogida de pedidos se considera la más crítica. Estas son las actividades que tienen el costo más alto y la que demanda mayor tiempo. Para traer un mejor desempeño en estas actividades, muchos especialistas han recurrido a dispositivos tecnológicos. Este artículo trae una revisión literaria con el objetivo de identificar qué dispositivos se encuentran en los estudios científicos con el fin de satisfacer la demanda de recolección de pedidos, e identificar los factores estudiados para cada uno, así como identificar puntos de vista y las oportinidades para futuras investigaciones, o desarrollo de nuevos dispositivos. Para eso se analizaron 101 artículos que contaban con algún dispositivo en la recogida de pedidos. Estos artículos fueron separados y categorizados según su uso y características. Como resultado, es posible que los investigadores y los tomadores de decisiones conozcan los dispositivos estudiados y comprendan cómo se comportan. A través de esta investigación se puede concluir que el interés por el tema ha crecido considerablemente en los últimos dos años, y que es necesario tomar en cuenta algunos factores antes de elegir el dispositivo, ellos son: layout, SKU, modelo de despliegue e implementación.

Biografía del autor/a
  1. Clarice Gonçalves Barreto, Pontifícia Universidade Católica de Goiás

    Possui graduação em Engenharia mecatrônica pela Universidade Paulista (2015). experiência fabril em indústria de bebidas através do programa de estagio (Ambev). Habilidade em receber e transmitir conhecimento. Capacidade em organização de dados e informações. Escreve artigos sobre automação industrial no blog Automação e Cartoon. Trabalho com conteúdos no YouTube no canal Eng Clarice Barreto. Tive oportunidade de participar de diversos eventos tecnológicos entre eles Case, Campus Party, duas edições de hackathon da N.A.S.A. Estou participando do programa de embaixadores de inovação no estado de Goiás.

  2. Ricardo Luiz Machado, Universidade Católica de Goiás

    É Doutor em Engenharia de Produção pela Universidade Federal de Santa Catarina (2003), Mestre em Gestão da Qualidade e Produtividade pelo Programa de Pós-Graduação em Engenharia de Produção da Universidade Federal de Santa Catarina (1997) e Engenheiro Civil pela Universidade Federal de Goiás (1992). É Coordenador da Agência de Inovação da PUC Goiás. É professor adjunto da Pontifícia Universidade Católica de Goiás, atuando no Programa de Pós-Graduação em Engenharia de Produção e Sistemas (MEPROS). Foi coordenador do Programa de Pós-Graduação em Engenharia de Produção e Sistemas (MEPROS) da Pontifícia Universidade Católica de Goiás (2010-2017). Foi coordenador do curso de graduação em Engenharia de Produção da Universidade Católica de Goiás (2001-2010). Foi conselheiro do Conselho Regional de Engenharia, Arquitetura e Agronomia de Goiás (2007-2009), tendo ocupado cargos de diretoria e coordenação de comissões. Tem experiência na área de Gestão de Operações e Logística atuando nas áreas de Logística 4.0, Ciência de dados, Manufatura 4.0, Closed-loop supply chain, realidade aumentada e virtual.

Referencias

Andriansyah, R., Etman, L.F.P., Adan, J. B. F., & Rooda, J. E. (2014). Design and Analysis of an Automated Order-Picking Workstation. Journal of Simulation, 8(2), 151-163. https://doi.org/10.1057/jos.2013.24.

Andriolo, A., Battini, D., Calzavara, M., Gamberi, M., Peretti, U., Persona A. Pilati, F., & Sgarbossa, F. (2016). New RFID pick-to-light system: Operating characteristics and future potential. International Journal of RF Technologies, 7(1), 43–63. https://doi.org/10.3233/RFT-150071.

Armstrong, R. D., Cook, W. D., & Saipe, A. L. (1979). Optimal Batching in a Semi-Automated Order Picking System. Journal of the Operational Research Society, 30(8), 711-720. https://doi.org/10.1057/jors.1979.173.

Atchade-Adelomou, P. Alonso-Linaje, G. Albo-Canals, J. & Casado-Fauli, D. (2021). QRobot: A Quantum Computing Approach in Mobile Robot Order Picking and Batching Problem Solver Optimization. Algorithms, 14 (7), 194. https://doi.org/10.3390/a14070194.

Atmaca, E, & Ozturk, A. (2013). Defining Order Picking Policy: A Storage Assignment Model and a Simulated Annealing Solution in AS/RS Systems. Applied Mathematical Modelling, 37(7), 5069-5079. https://doi.org/10.1016/j.apm.2012.09.057.

Bansal, V., Roy, D., & Pazour, J. A. (2021). Performance Analysis of Batching Decisions in Waveless Order Release Environments for E‐commerce Stock‐to‐picker Order Fulfillment. International Transactions in Operational Research, 28(4), 1787-1820. https://doi.org/10.1111/itor.12921.

Battini D, Calzavara M,Persona A, & Sgarbossa F. (2017) A comparative analysis of different paperless picking systems. Industrial Management & Data Systems, 115(3), 483–503. https://doi.org/10.1108/IMDS-10-2014-0314.

Beinschob, P., Meyer, M., Reinke, C., Digani, V., Secchi, C., & Sabattini, L. (2017). Semi-Automated Map Creation for Fast Deployment of AGV Fleets in Modern Logistics. Robotics and Autonomous Systems, 87, 281–295. DOI.org (Crossref), https://doi.org/10.1016/j.robot.2016.10.018.

Bolu, A. & Korcak, O. (2021). Adaptive Task Planning for Multi-Robot Smart Warehouse. IEEE Access, 9, 27346-27358. https://doi.org/10.1109/ACCESS.2021.3058190.

Bortolini, M., Faccio, M., Ferrari, E., Gamberi, M., & Pilati F. (2017). Time and Energy Optimal Unit-Load Assignment for Automatic S/R Warehouses. International Journal of Production Economics, 190, 133-145. https://doi.org/10.1016/j.ijpe.2016.07.024.

Boysen, N., Fedtke, S., & Weidinger, F. (2018). Optimizing Automated Sorting in Warehouses: The Minimum Order Spread Sequencing Problem. European Journal of Operational Research, 270(1), 386–400. https://doi.org/10.1016/j.ejor.2018.03.026.

Boysen, N., Briskorn, D., & Emde, S. (2017A). Parts-to-Picker Based Order Processing in a Rack-Moving Mobile Robots Environment. European Journal of Operational Research, 262(2), 550-562. https://doi.org/10.1016/j.ejor.2017.03.053.

Boysen, N., FüBler, D., & Stephan K. (2020). See the Light: Optimization of Put‐to‐light Order Picking Systems. Naval Research Logistics (NRL), 67 (1), 3–20. https://doi.org/10.1002/nav.21883.

Boysen, N., Briskorn, D., & Emde, S. (2017B). Sequencing of Picking Orders in Mobile Rack Warehouses. European Journal of Operational Research, 259(1), 293–307. https://doi.org/10.1016/j.ejor.2016.09.046.

Bozer, Y. A., & Aldarondo, F.J. (2018). A Simulation-Based Comparison of Two Goods-to-Person Order cking Systems in an Online Retail Setting. International Journal of Production Research, 56 (11), 3838–3858. https://doi.org/10.1080/00207543.2018.1424364.

Cai, J., Li, X., Liang, Y., & Ouyang, S. (2021). Collaborative Optimization of Storage Location Assignment and Path Planning in Robotic Mobile Fulfillment Systems. Sustainability, 13(10), 5644. https://doi.org/10.3390/su13105644.

Calzavara, M., Sgarbossa, F., & Persona, A. (2019). Vertical Lift Modules for Small Items Order Picking: An Economic Evaluation. International Journal of Production Economics, 210, 199–210. https://doi.org/10.1016/j.ijpe.2019.01.012.

Cao, W., Jiang, P., Liu, B., & Jiang, K. (2018). Real-Time Order Scheduling and Execution Monitoring in Public Warehouses Based on Radio Frequency Identification. The International Journal of Advanced Manufacturing Technology, 95(5), 2473-2494. https://doi.org/10.1007/s00170-017-1381-z.

Chang, D. T., Wen, U. P., & Lin, J. T. (1993). Picking Strategies to the Two‐carousel‐single‐server System in an Automated Warehouse. Journal of the Chinese Institute of Engineers, 16(6), 817-824. https://doi.org/10.1080/02533839.1993.9677556.

Choy, K. L., Ho, G. T. S., & Lee, C. K. H. (2017). A RFID-Based Storage Assignment System for Enhancing the Efficiency of Order Picking. Journal of Intelligent Manufacturing, 28(1), 111–129. https://doi.org/10.1007/s10845-014-0965-9.

Correll, N., Bekris, K. E., Berenson, D., Brock, O., Causo, A., Hauser, K., Okada, k., Rodriguez, A., Romano, J. R., & Wurman, P. R. (2018). Analysis and observations from the first amazon picking challenge. IEEE Transactions on Automation Science and Engineering, 15(1), 172-188. https://doi.org/10.1109/TASE.2016.2600527.

Custodio, L., & Machado, R. (2020). Flexible automated warehouse: A literature review and an innovative framework. The International Journal of Advanced Manufacturing Technology, 106 (1), 533–558. https://doi.org/10.1007/s00170-019-04588-z.

D’Avella, S., Tripicchio, P., & Avizzano, C. A. (2020). A Study on Picking Objects in Cluttered Environments: Exploiting Depth Features for a Custom Low-Cost Universal Jamming Gripper. Robotics and Computer-Integrated Manufacturing, 63, 101888. https://doi.org/10.1016/j.rcim.2019.101888.

D’Souza, F., Costa, J., & Pires, J. N. (2020). Development of a solution for adding a collaborative robot to an industrial AGV. Industrial Robot: the international journal of robotics research and application, 47(5), 723-735. https://doi.org/10.1108/IR-01-2020-0004.

De Koster, R., Le-Duc, T., & Roodbergen, K. J. (2007) Design and Control of Warehouse Order Picking: A Literature Review. European Journal of Operational Research, 182(2), 481–501. https://doi.org/10.1016/j.ejor.2006.07.009.

De Vries, J., De Koste, R., & Stam D. (2016). Exploring the Role of Picker Personality in Predicting Picking Performance with Pick by Voice, Pick to Light and RF-Terminal Picking. International Journal of Production Research, 54(8), 2260–2274. https://doi.org/10.1080/00207543.2015.1064184.

Department of Financial and Management Engineering, School of Engineering, University of the Aegean, Chios, Greece, (2020). Testing vision picking technology in warehouse operations: Evidence from laboratory experiments. International Journal of Industrial Engineering and Management, 11(1), 19–30. https://doi.org/10.24867/IJIEM-2020-1-249.

Dukic, G., Opetuk, T., Lerher, T. (2015). A throughput model for a dual-tray Vertical lift Module with a human order picker. International Journal of Production Economics, 170, 874-881. https://doi.org/10.1016/j.ijpe.2015.04.009.

Elsayed, E. A., & Stern, R.G. (1983). Computerized Algorithms for Order Processing in Automated Warehousing Systems. International Journal of Production Research, 21(4), 579–586. https://doi.org/10.1080/00207548308942392.

Fager, P., Sgarbossa, F., & Calzavara, M. (2021). Cost Modelling of Onboard Cobot-Supported Item Sorting in a Picking System. International Journal of Production Research, 59(11), 3269-3284. https://doi.org/10.1080/00207543.2020.1854484.

Fang, W., & An, Z. (2020). A Scalable Wearable AR System for Manual Order Picking Based on Warehouse Floor-Related Navigation. The International Journal of Advanced Manufacturing Technology, 109(7), 2023-2037. https://doi.org/10.1007/s00170-020-05771-3.

Fontin, J. R., & Lin, S. W. (2020). A Joint Comparative Analysis of Routing Heuristics and Paperless Picking Technologies Using Simulation and Data Envelopment Analysis. Applied Sciences, 10(24), 8777. https://doi.org/10.3390/app10248777.

Foroughi, A., Boysen, N., Emde, S., & Schneider M. (2021). High-Density Storage with Mobile Racks: Picker Routing and Product Location. Journal of the Operational Research Society, 72(3), 535-553. https://doi.org/10.1080/01605682.2019.1700180.

Füchtenhans, M., Grosse E. H., & Glock C. H. (2021). Smart Lighting Systems: State-of-the-Art and Potential Applications in Warehouse Order Picking. International Journal of Production Research, 59 (12), 3817–3839. https://doi.org/10.1080/00207543.2021.1897177.

Gajšek, B., Ðukić, G., Butlewski, M., Opetuk, T., Cajner, H., & Kač, S.M. (2020). The Impact of the Applied Technology on Health and Productivity in Manual ‘Picker-to-Part’ Systems. Work, 65(3), 525–536. https://doi.org/10.3233/WOR-203107.

Gong, Y. Jin, M., & Yuan Z. (2021). Robotic Mobile Fulfilment Systems Considering Customer Classes. International Journal of Production Research, 59(16), 5032-5049. https://doi.org/10.1080/00207543.2020.1779370.

Guo, A., Wu, X., Shen, Z., Starner, T., Baumann, H., & Gililand, S. (2015). Order Picking with Head-Up Displays. Computer, 48(6), 16–24. https://doi.org/10.1109/MC.2015.166.

Habazin, J., Gasnovic, A., & Bajor I. (2017). Order Picking Process in Warehouse: Case Study of Dairy Industry in Croatia. Promet - Traffic&Transportation, 29(1), 57–65. https://doi.org/10.7307/ptt.v29i1.2106.

Hanson, R., Falkenstrõm, W., & Miettinen, M. (2017). Augmented Reality as a Means of Conveying Picking Information in Kit Preparation for Mixed-Model Assembly. Computers & Industrial Engineering, 113, 570-575. https://doi.org/10.1016/j.cie.2017.09.048.

He, Z., Aggarwal, V., & Nof, S. Y. (2018). Differentiated Service Policy in Smart Warehouse Automation. International Journal of Production Research, 56(22), 6956-6970. https://doi.org/10.1080/00207543.2017.1421789.

Hou, J. L., Wu, N., & Wu, Y. J. (2009). A Job Assignment Model for Conveyor-Aided Picking System. Computers & Industrial Engineering, 56(4), 1254-1264. https://doi.org/10.1016/j.cie.2008.07.017.

Hwang, H., Baek, W. J., & Lee, M. K. (1988). Clustering Algorithms for Order Picking in an Automated Storage and Retrieval System. International Journal of Production Research, 26(2), 189–201. https://doi.org/10.1080/00207548808947853.

Jaghbeer, Y., Hanson, R., Johansson, M. I. (2020). Automated Order Picking Systems and the Links between Design and Performance: A Systematic Literature Review. International Journal of Production Research, 58 (15), 4489–4505. https://doi.org/10.1080/00207543.2020.1788734.

Jerman, B., Ekren, B.Y., Küxükyasar, M., & Lerher, T. (2021). Simulation-Based Performance Analysis for a Novel AVS/RS Technology with Movable Lifts. Applied Sciences, 11(5), 22-83. www.mdpi.com, https://doi.org/10.3390/app11052283.

Jiang, H. (2020). Solving Multi-Robot Picking Problem in Warehouses: A Simulation Approach. International Journal of Simulation Modelling, 19 (4), 701-712. https://doi.org/10.2507/IJSIMM19-4-CO19.

Jiang, Z. Z., Wan, M., Pei, Z., & Qin, X. (2021). Spatial and Temporal Optimization for Smart Warehouses with Fast Turnover. Computers & Operations Research, 125, 105091. https://doi.org/10.1016/j.cor.2020.105091.

Kaipa, K. N., Kankanhalli-nagendra, A. S., Kumbla, N. B., Shriyam, S., Thevendria-karthic, S., Mavel, J. A., Gupta, S. K., Addressing Perception Uncertainty Induced Failure Modes in Robotic Bin-Picking. Robotics and Computer-Integrated Manufacturing, 42, 17–38. https://doi.org/10.1016/j.rcim.2016.05.002.

Keung, K. L., Lee, C. K. M., Ji, P., & Ng, K. K. H. (2020). Cloud-Based Cyber-Physical Robotic Mobile Fulfillment Systems: A Case Study of Collision Avoidance. IEEE Access, 8, 89318-89336. https://doi.org/10.1109/ACCESS.2020.2992475.

Khachatryan, M., & McGinnis, L. F. (2014). Picker Travel Time Model for an Order Picking System with Buffers. IIE Transactions, 46(9), 894–904. https://doi.org/10.1080/0740817X.2013.823001.

Khojasteh, Y., & Son, J. D. (2016). A Travel Time Model for Order Picking Systems in Automated Warehouses. The International Journal of Advanced Manufacturing Technology, 86(5), 2219-2229. https://doi.org/10.1007/s00170-016-8340-y.

Kim, B. I., Heragu, S. S., Graves, R. J., & Onge, A. S. (2003). Clustering-Based Order-Picking Sequence Algorithm for an Automated Warehouse. International Journal of Production Research, 41(15), 3445-3460. https://doi.org/10.1080/0020754031000120005.

Kim, H. J., Pais, C., & Shen, Z. J. M. (2020). Item Assignment Problem in a Robotic Mobile Fulfillment System. IEEE Transactions on Automation Science and Engineering, 17(4), 1854-1867. https://doi.org/10.1109/TASE.2020.2979897.

Kim, Y., & Hong, S (2020). Two Picker Cooperation Strategies for Zone Picking Systems with PTL Technology. IEEE Access, 8, 106059-106070. https://doi.org/10.1109/ACCESS.2020.2999342.

Kong, X. T. R., Yang, X., Peng, K. L., & Li, C. Z. (2020). Cyber Physical System-Enabled Synchronization Mechanism for Pick-and-Sort Ecommerce Order Fulfilment. Computers in Industry, 118, 103-220. https://doi.org/10.1016/j.compind.2020.103220.

Krug, R., Stoyanov, T., Tincani, V., Andreasso, H., Mosberger, R., Fantoni, G., & Lilienthal, A. (2016). The Next Step in Robot Commissioning: Autonomous Picking and Palletizing. IEEE Robotics and Automation Letters, 1 (1), 546-553. https://doi.org/10.1109/LRA.2016.2519944.

Kudelska, I., & Niedbał, R. (2020) Technological and Organizational Innovation in Warehousing Process – Research over Workload of Staff and Efficiency of Picking Stations. E+M Ekonomie a Management, 23 (3), 67–81. https://doi.org/10.15240/tul/001/2020-3-005.

Lamballais, T., Roy, D., & De Koster, R. B. M. (2020). Inventory Allocation in Robotic Mobile Fulfillment Systems. IISE Transactions, 52(1), 1–17. https://doi.org/10.1080/24725854.2018.1560517.

Lamballais, T., Roy, D., & De Koster R. B. M. (2017). Estimating Performance in a Robotic Mobile Fulfillment System. European Journal of Operational Research, 256(3), 976-990. https://doi.org/10.1016/j.ejor.2016.06.063.

Latif, U. K., & Shin, S. Y. (2020). OP-MR: The Implementation of Order Picking Based on Mixed Reality in a Smart Warehouse. The Visual Computer, 36(7), 1491-1500. https://doi.org/10.1007/s00371-019-01745-z.

Lee, H. Y., & Murray, C. C. (2019). Robotics in Order Picking: Evaluating Warehouse Layouts for Pick, Place, and Transport Vehicle Routing Systems. International Journal of Production Research, 57(18), 5821-4841. https://doi.org/10.1080/00207543.2018.1552031.

Lee, J. A., Chang, Y. S., & Karwowski, W. (2020). Assessment of working postures and physical loading in advanced order picking tasks: A case study of human interaction with automated warehouse goods-to-picker systems. Work, 67(4), 855-866. https://doi.org/10.3233/WOR-203337.

Lee, S. D., & Kuo Y.C. (2008) Exact and Inexact Solution Procedures for the Order Picking in an Automated Carousal Conveyor. International Journal of Production Research, 46 (16), 4619–4636. https://doi.org/10.1080/00207540601166990.

Liu, D. Zhao X, Wang Y. (2019). Items Assignment Optimization for Complex Automated Picking Systems. Cluster Computing, 22 (3). Springer Link, https://doi.org/10.1007/s10586-017-1529-5.

Liu, D. Mou, S. Wu, Y. Shan, G. (2015). Research on Hybrid Picking Strategy in an Automated Order Picking System. International Journal of Control and Automation, 8 (8). DOI.org (Crossref), https://doi.org/10.14257/ijca.2015.8.8.12.

Liu, J. E. Zhang, S. Liu, H. (2019). Research on AGV Path Planning under ‘Parts-to-Picker’ Mode. Open Journal of Social Sciences, 07 (6), 1–14. DOI.org (Crossref), https://doi.org/10.4236/jss.2019.76001.

Marchet G, Melacini M, Perotti S. (2015) Investigating Order Picking System Adoption: A Case-Study-Based Approach. International Journal of Logistics Research and Applications, 18 (1), 82–98. DOI.org (Crossref), https://doi.org/10.1080/13675567.2014.945400.

Mnyusiwalla, H. Triantafyllou, P. Sotiropoulos, P. Roa, M.A. Fried, W. Sundaram, A.M. Russell, D. Deacon, G. (2020). A Bin-Picking Benchmark for Systematic Evaluation of Robotic Pick-and-Place Systems. IEEE Robotics and Automation Letters, 5 (2). DOI.org (Crossref), https://doi.org/10.1109/LRA.2020.2965076.

Nicolas, L. Yannick, F. Ramzi. H. (2018). Order Batching in an Automated Warehouse with Several Vertical Lift Modules: Optimization and Experiments with Real Data. European Journal of Operational Research, 267 (3). DOI.org (Crossref), https://doi.org/10.1016/j.ejor.2017.12.037.

Park, B. C. Frazelle, E. H. White, J. A. (1999). Buffer sizing models for end-of-aisle order picking systems. IIE Transactions, 31 (1). DOI.org (Crossref), https://doi.org/10.1023/A:1007520600713.

Polten, L, & Emde, S. (2021). Scheduling Automated Guided Vehicles in Very Narrow Aisle Warehouses. Omega, 99. DOI.org (Crossref), https://doi.org/10.1016/j.omega.2020.102204.

Poon, T.C. Choy, K.L. Chow, H.K.H. Lau, H.C.W. Chan, F.T.S. Ho, K.C. (2009). A RFID Case-Based Logistics Resource Management System for Managing Order-Picking Operations in Warehouses. Expert Systems with Applications, 36 (4). DOI.org (Crossref), https://doi.org/10.1016/j.eswa.2008.10.011.

Rajotia, S. Shanker, K. Batra, J. L. (1998). Determination of Optimal AGV Fleet Size for an FMS. International Journal of Production Research, 36 (5). DOI.org (Crossref), https://doi.org/10.1080/002075498193273.

Ramtin, F. & Pazour, J. A. (2014). Analytical models for an automated storage and retrieval system with multiple in-the-aisle pick positions. IIE Transactions, 46 (9). https://doi.org/10.1080/0740817X.2014.882037.

Ramtin, F. & Pazour, J. A. (2015). Product Allocation Problem for an AS/RS with Multiple in-the-Aisle Pick Positions. IIE Transactions, 47 (12). DOI.org (Crossref), https://doi.org/10.1080/0740817X.2015.1027458.

Reif, R. Günthner, W. A. Schwerdtfeger, B. Klinker, G. (2010). Evaluation of an Augmented Reality Supported Picking System Under Practical Conditions. Computer Graphics Forum, 29 (1), 2–12. DOI.org (Crossref), https://doi.org/10.1111/j.1467-8659.2009.01538.x.

Reif, R. & Günthener, W. A. (2009). Pick-by-Vision: Augmented Reality Supported Order Picking. The Visual Computer, 25 (5). Springer Link, https://doi.org/10.1007/s00371-009-0348-y.

Roodbergen, K. J. & Vis, I. F. A. (2009). A Survey of Literature on Automated Storage and Retrieval Systems. European Journal of Operational Research, 194 (2). DOI.org (Crossref), https://doi.org/10.1016/j.ejor.2008.01.038.

Roy, D. Nigam, S. De koster, R. Adan, I. Resing J. (2019). Robot-Storage Zone Assignment Strategies in Mobile Fulfillment Systems. Transportation Research Part E: Logistics and Transportation Review, 122. DOI.org (Crossref), https://doi.org/10.1016/j.tre.2018.11.005.

Schwerdtfeger, B. Reif, R. Günthner, W. A. Klinker, G. (2011). Pick-by-Vision: There Is Something to Pick at the End of the Augmented Tunnel. Virtual Reality, 15 (2). Springer Link, https://doi.org/10.1007/s10055-011-0187-9.

Sgarbossa, F. Calzavara, M. Persona, A. (2019). Throughput models for a dual-bay VLM order picking system under different configurations. Industrial Management & Data Systems, 119 (6). https://doi.org/10.1108/IMDS-11-2018-0518.

Tang, H., Cheng, X., Jiang, W., & Chen, S. (2021). Research on Equipment Configuration Optimization of AGV Unmanned Warehouse. IEEE Access, 9, 47946-47959. https://doi.org/10.1109/ACCESS.2021.3066622.

Tappia, E., Roy, D., Melacini, M., & De koster, R. (2019). Integrated Storage-Order Picking Systems: Technology, Performance Models, and Design Insights. European Journal of Operational Research, 274(3) 947–965. https://doi.org/10.1016/j.ejor.2018.10.048.

Tu, M., Yang, M. F., Kao, S. L., Lin, F. C., Wu M. H., & Lin, C. K. (2021). Using a Heuristic Multi-Objective Genetic Algorithm to Solve the Storage Assignment Problem for CPS-Based Pick-and-Pass System. Enterprise Information Systems, 15 (9), 1238-1259. https://doi.org/10.1080/17517575.2020.1811388.

Valle, C. A., & Beasley, J. E. (2021). Order Allocation, Rack Allocation and Rack Sequencing for Pickers in a Mobile Rack Environment. Computers & Operations Research, 125, 105090. https://doi.org/10.1016/j.cor.2020.105090.

Venkitasubramony, R., & Adil, G. K. (2017). Design of an Order-Picking Warehouse Factoring Vertical Travel and Space Sharing. The International Journal of Advanced Manufacturing Technology, 91(5), 1921–1934. https://doi.org/10.1007/s00170-016-9879-3.

Wang, Y., Shandong, M., & Changpeng, S. (2014). Selecting between Pick-and-sort System and Carousel System Based on Order Clustering and Genetic Algorithm. International Journal of Control and Automation, 7 (3), 89–102. https://doi.org/10.14257/ijca.2014.7.4.09.

Wang, Z., Sheu, J. B., Teo, C. P., & Xue, G. (2021). Robot Scheduling for Mobile‐Rack Warehouses: Human–Robot Coordinated Order Picking Systems. Production and Operations Management. 31(1), 98-116. https://doi.org/10.1111/poms.13406.

Weidinger, F., Boysen, N., & Briskorn, D. (2018). Storage Assignment with Rack-Moving Mobile Robots in KIVA Warehouses. Transportation Science, 52(6), 1479-1495. https://doi.org/10.1287/trsc.2018.0826.

Winkelhaus, S., Grosse, E. H., & Morana S. (2021) Towards a Conceptualisation of Order Picking 4.0. Computers & Industrial Engineering, 159, 107511. https://doi.org/10.1016/j.cie.2021.107511.

Wu, S., Chi, C., Wang, W., & Wu, Y. (2020). Research of the Layout Optimization in Robotic Mobile Fulfillment Systems. International Journal of Advanced Robotic Systems, 17(6). https://doi.org/10.1177/1729881420978543.

Wu, Y. & Wu, Y. (2014). Taboo Search Algorithm for Item Assignment in Synchronized Zone Automated Order Picking System. Chinese Journal of Mechanical Engineering, 27(4), 860-866. https://doi.org/10.3901/CJME.2014.0430.084.

Wu, Y., Zhou, C., Wu, Y., & Kong, X. T. R. (2017). Zone Merge Sequencing in an Automated Order Picking System. International Journal of Production Research, 55(21), 6500-6515. https://doi.org/10.1080/00207543.2016.1264641.

Xie, L., Thieme, N., Krenzler, R., & Li, H. (2021). Introducing Split Orders and Optimizing Operational Policies in Robotic Mobile Fulfillment Systems. European Journal of Operational Research, 288(1), 80–97. https://doi.org/10.1016/j.ejor.2020.05.032.

Xing, L., Liu, Y., Li, H., Wu, C. C., & Lin, W. C., & Chen, X. (2020). A Novel Tabu Search Algorithm for Multi-AGV Routing Problem. Mathematics, 8(2), 279. https://doi.org/10.3390/math8020279.

Yang, D., Wu, Y., & Huo D, (2021). Research on Design of Cross-Aisles Shuttle-Based Storage/Retrieval System Based on Improved Particle Swarm Optimization. IEEE Access, 9, 67786-67796. https://doi.org/10.1109/ACCESS.2021.3077974.

Yoshitake, H., Kamoshida, R., & Nagashima, Y. (2019). New Automated Guided Vehicle System Using Real-Time Holonic Scheduling for Warehouse Picking. IEEE Robotics and Automation Letters, 4(2), 1045-1052. https://doi.org/10.1109/LRA.2019.2894001.

Yuan, Z. & Gong, Y. Y. (2017). Bot-In-Time Delivery for Robotic Mobile Fulfillment Systems. IEEE Transactions on Engineering Management, 64(1), 83–93. https://doi.org/10.1109/TEM.2016.2634540.

Zhuang, Z., Huang, Z., Sun, Y., & Qin, W. (2021). Optimization for Cooperative Task Planning of Heterogeneous Multi-Robot Systems in an Order Picking Warehouse. Engineering Optimization, 53(10), 1715-1732. https://doi.org/10.1080/0305215X.2020.1821198.

Zou, B., Gong, Y., Xu, X., & Yuan. Z. (2017). Assignment rules in robotic mobile fulfilment systems for online retailers. International Journal of Production Research, 55(20), 6175-6192. https://doi.org/10.1080/00207543.2017.1331050.

Zou, B. Xu, X., Gong, Y., & De koster, R. (2018). Evaluating Battery Charging and Swapping Strategies in a Robotic Mobile Fulfillment System. European Journal of Operational Research, 267(2), 733-753. https://doi.org/10.1016/j.ejor.2017.12.008

Xue, F., Tang, H., Su, Q., & Li, T. (2019). Task Allocation of Intelligent Warehouse Picking System based on Multi-robot Coalition. KSII Transactions on Internet and Information Systems, 13(7), 3566-3582.

Cover Image
Descargas
Publicado
2022-10-21
Número
Vol. 8 Núm. 6 (2022): Volume 8 - Número 6 - Ano 2022 - Número Regular (Outubro - Dezembro)
Sección
LOGÍSTICA
Licencia

Derechos de autor 2022 Brazilian Journal of Production Engineering

Creative Commons License

Esta obra está bajo una licencia internacional Creative Commons Atribución 4.0.

Todas las obras publicadas en la Revista Brasileña de Ingeniería de Producción (BJPE) están bajo la licencia Creative Commons Atribución 4.0 Internacional (CC BY 4.0). Esto significa que: Cualquier persona puede copiar, distribuir, exhibir, adaptar, remezclar e incluso utilizar comercialmente el contenido publicado en la revista; Siempre que se reconozca debidamente a los autores y a BJPE como fuente original; No se requiere permiso adicional para la reutilización, siempre que se respeten los términos de la licencia. Esta política cumple con los principios de acceso abierto, promoviendo la amplia difusión del conocimiento científico. 🔗 Haga clic aquí para acceder a la licencia completa.

Cómo citar

Barreto, C. G., & Machado, R. L. (2022). Dispositivos tecnológicos en orden Picking System: Revisión bibliográfica. Brazilian Journal of Production Engineering, 8(6), 01-33. https://doi.org/10.47456/bjpe.v8i6.39192