Briquetas sostenibles de biocarbón a partir de residuos de biomasa: condiciones de proceso y potencial energético
- Autores/as
-
-
Autor/a
-
Autor/a
-
Autor/a
-
Autor/a
-
Autor/a
-
Autor/a
-
- Palabras clave:
- Briquetas carbonizadas, Residuos lignocelulósicos, Rendimiento energético, Análisis imediato, Combustibles sostenibles
- Resumen
-
Este estudio evaluó las características físicas, mecánicas y energéticas de briquetas carbonizadas producidas a partir de cáscaras de plátano, aserrín y papel reciclado, utilizando almidón de yuca como aglutinante. Se investigaron cinco formulaciones (F1–F5) para evaluar la influencia de la composición de la biomasa sobre la densidad aparente, la resistencia a la compresión, la durabilidad mecánica, el análisis inmediato, el poder calorífico superior (PCS) y el comportamiento durante la combustión. La densidad aparente osciló entre 950 y 1060 kg m⁻³, y las formulaciones F3 y F4 presentaron una resistencia a la compresión superior a 2 MPa y una durabilidad mecánica superior al 95%. El PCS varió entre 20,08 y 24,09 MJ kg⁻¹. La formulación F4 presentó la mayor resistencia mecánica y durabilidad, mientras que F5 registró el mayor PCS, asociado con un menor contenido de cenizas y un mayor contenido de carbono fijo, junto con un menor consumo aparente de combustible y una menor tasa de combustión. Estos comportamientos contrastantes demuestran que la robustez mecánica y el contenido energético gravimétrico no necesariamente se maximizan con una misma formulación. Los resultados proporcionan una base para optimizar briquetas carbonizadas elaboradas a partir de diferentes residuos, según sus aplicaciones previstas, y destacan el potencial de los residuos de biomasa disponibles localmente para la producción de combustibles sólidos alternativos.
- Biografía del autor/a
- Referencias
-
Adeleke, A. E., Mosuro, T. S., & Musa, A. I. (2026). Production of briquettes from the mixture of sawdust, banana peels and palm fronds using cassava starch as binder. Agricultural Engineering International: CIGR Journal, 28(1), 179-88. https://cigrjournal.org/index.php/Ejounral/article/view/9987/4571
Akowuah, J. O., Kemausuor, F., & Mitchual, S. J. (2012). Physico-chemical characteristics and market potential of sawdust charcoal briquette. International Journal of Energy and Environmental Engineering, 3, 20. https://doi.org/10.1186/2251-6832-3-20
Alves, M. B. F., Chaves, R. M., Saraiva, T. dos S., da Silva, E. K. S., & Candeia, R. A. (2022). Physico-chemical and energy profile of briquettes composed of coconut shells, banana peels and/or sawdust. Brazilian Journal of Development, 8(2), 8893-909. https://doi.org/10.34117/bjdv8n2-032
Antal, M. J. & Grønli, M. (2003). The art, science, and technology of charcoal production. Industrial & Engineering Chemistry Research, 42(8), 1619-40. https://doi.org/10.1021/ie0207919
ASTM International. (2019). Standard test method for gross calorific value of coal and coke (ASTM D5865/D5865M-19). ASTM International https://store.astm.org/d5865_d5865m-19.html
ASTM International. (2020). Standard test method for volatile matter in the analysis sample of coal and coke (ASTM D3175-20). ASTM International. https://store.astm.org/d3175-20.html
Bot, B. V., Axaopoulos, P. J., Sakellariou, E. I., Sosso, O. T., & Tamba, J. G. (2023). Economic viability investigation of mixed-biomass briquettes made from agricultural residues for household cooking use. Energies, 16(18), 6469. https://doi.org/10.3390/en16186469
Bot, B. V., Sosso, O. T., Tamba, J. G., Lekane, E., Bikai, J., & Ndame, M. K. (2023a). Preparation and characterization of biomass briquettes made from banana peels, sugarcane bagasse, coconut shells and rattan waste. Biomass Conversion and Biorefinery, 13, 7937-46. https://doi.org/10.1007/s13399-021-01762-w
Demirbas, A. (2004). Combustion characteristics of different biomass fuels. Progress in Energy and Combustion Science, 30(2), 219-30. https://doi.org/10.1016/j.pecs.2003.10.004
Dinesha, P., Kumar, S., & Rosen, M. A. (2019). Biomass briquettes as an alternative fuel: a comprehensive review. Energy Technology, 7(5), 1801011. https://doi.org/10.1002/ente.201801011
Food and Agriculture Organization of the United Nations. (2017). The charcoal transition: greening the charcoal value chain to mitigate climate change and improve local livelihoods. FAO. https://openknowledge.fao.org/handle/20.500.14283/i6935en
Food and Agriculture Organization of the United Nations. FAO. (2018). Improved charcoal technologies and briquette production from woody residues in Malawi: Bioenergy and Food Security (BEFS) case study (FAO Forestry Paper No. 154). FAO. https://openknowledge.fao.org/handle/20.500.14283/ca2087en
Grover, P. D. & Mishra, S. K. (1996). Biomass briquetting: Technology and practices (Field Document No. 46). Food and Agriculture Organization of the United Nations. https://www.fao.org/4/AD579E/AD579E00.htm
Handayani, S. A., Widiati, K. Y., & Putri, F. (2023). Quality of charcoal briquettes from sawdust waste of Ulin (Eusideroxylon zwageri) and coconut shell (Cocos nucifera) based on variations in ratio and particle size. IOP Conference Series: Earth and Environmental Science, 1282, 012049. https://doi.org/10.1088/1755-1315/1282/1/012049
Hassan, L. G., Sani, N. A., Sokoto, A. M., & Tukur, U. G. (2017). Comparative studies of burning rates and water boiling time of wood charcoal and briquettes produced from carbonized Martynia annua woody shells. Nigerian Journal of Basic and Applied Sciences, 25(2), 21-7. https://doi.org/10.4314/njbas.v25i2.4
International Energy Agency. (2025). World Energy Outlook 2025. IEA. https://www.iea.org/reports/world-energy-outlook-2025
International Organization for Standardization. ISO. (2021). Solid biofuelsFuel specifications and classes—Part 6: Graded non-woody pellets (ISO 17225-6:2021). ISO. https://www.iso.org/standard/76093.html
International Organization for Standardization. ISO. (2022). Solid biofuels—Determination of ash content (ISO 18122:2022). ISO. https://www.iso.org/standard/83190.html
International Organization for Standardization. ISO. (2022). Solid biofuels—Determination of moisture content—Part 1: Reference method (ISO 18134-1:2022). ISO. https://www.iso.org/standard/83191.html
Kaliyan, N. & Morey, R. V. (2009). Factors affecting strength and durability of densified biomass products. Biomass and Bioenergy, 33(3), 337-59. https://doi.org/10.1016/j.biombioe.2008.08.005
Kebede, T., Berhe, D. T., & Zergaw, Y. (2022). Combustion characteristics of briquette fuel produced from biomass residues and binding materials. Journal of Energy, 2022, 4222205. https://doi.org/10.1155/2022/4222205
Kirchherr, J., Reike, D., & Hekkert, M. (2017). Conceptualizing the circular economy: An analysis of 114 definitions. Resources, Conservation and Recycling, 127, 221-32. https://doi.org/10.1016/j.resconrec.2017.09.005
Kpalo, S. Y., Zainuddin, M. F., Manaf, L. A., & Roslan, A. M. (2020). A review of technical and economic aspects of biomass briquetting. Sustainability, 12(11), 4609. https://doi.org/10.3390/su12114609
Mekonen, A. G., Berhe, G. G., Desta, M. B., Belete, F. A., & Gebremariam, A. F. (2024). Production and characterization of briquettes from sugarcane bagasse of Wonji Sugar Factory, Oromia, Ethiopia. Materials for Renewable and Sustainable Energy, 13(1), 27-43. https://doi.org/10.1007/s40243-023-00248-1
Mitchual, S. J., Frimpong-Mensah, K., & Darkwa, N. A. (2014). Evaluation of fuel properties of six tropical hardwood timber species for briquettes. Journal of Sustainable Bioenergy Systems, 4(1), 1-9. https://doi.org/10.4236/jsbs.2014.41001
Mwampamba, T. H., Owen, M., & Pigaht, M. (2013). Opportunities, challenges and way forward for the charcoal briquette industry in Sub-Saharan Africa. Energy for Sustainable Development, 17(2), 158-70. https://doi.org/10.1016/j.esd.2012.10.006
Nhuchhen, D. R. & Salam, P. A. (2012). Estimation of higher heating value of biomass from proximate analysis: a new approach. Fuel, 99, 55-63. https://doi.org/10.1016/j.fuel.2012.04.015
Njenga, M., Karanja, N., Karlsson, H., Jamnadass, R., Iiyama, M., Kithinji, J., Sundberg, C., & Jirjis, R. (2013). Charcoal production and strategies to enhance its sustainability in Kenya. Development in Practice, 23(3), 359-71. https://doi.org/10.1080/09614524.2013.780529
Njimou, J. R., Danga, G. M. N., Balike, M., Haman, Z., Ngouyamnsa-Ghenmi, E. M., Njike, R. M. T., Genola, O. B., Talla, A., & Elambo, N. G. (2026). Optimizing calorific value of energy briquettes from agricultural biomass: a novel approach utilizing maize and cassava residues. Waste Disposal & Sustainable Energy, 8, 89-103. https://doi.org/10.1007/s42768-025-00123-4
Nonsawang, S., Sokudlor, N., Sanchumpu, P., Suaili, W., Khaeso, K., Oupathum, C., Sethanan, K., & Laloon, K. (2026). Insights into the co-utilization of cassava industry waste and invasive woody biomass for charcoal briquettes production. Carbon Resources Conversion. Advance online publication. https://doi.org/10.1016/j.crcon.2026.100416
Nwankwo, C. I., Onuegbu, T. U., Okafor, I. F., & Igwenagu, P. C. (2023). Utilization of agricultural waste in the production of charcoal briquette blend as alternative source of energy. IOP Conference Series: Earth and Environmental Science, 1178, 012015. https://doi.org/10.1088/1755-1315/1178/1/012015
Olugbade, T. O., Ojo, O. T., & Mohammed, T. I. (2019). Influence of binders on combustion properties of biomass briquettes: a recent review. BioEnergy Research, 12(2), 241-59. https://doi.org/10.1007/s12155-019-09973-w
Onukak, I. E., Mohammed-Dabo, I. A., Ameh, A. O., Okoduwa, S. I. R., & Fasanya, O. O. (2017). Production and characterization of biomass briquettes from tannery solid waste. Recycling, 2(4), 17. https://doi.org/10.3390/recycling2040017
Python Software Foundation. (2023). Python 3.11 documentation. https://docs.python.org/3.11/
Ramdas, V., Njokweni, S. G., Letsoalo, P., Motaung, S., & Ramchuran, S. O. (2025). Bio-coal briquetting as a potential sustainable valorization strategy for fine coal: a South African perspective in a global context. Energies, 18(14), 3746. https://doi.org/10.3390/en18143746
Rawat, S. & Kumar, S. (2022). Critical review on processing technologies and economic aspect of bio-coal briquette production. Preparative Biochemistry & Biotechnology, 52(8), 855-71. https://doi.org/10.1080/10826068.2021.2001754
Saeed, A. A. H., Harun, N. Y., Bilad, M. R., Afzal, M. T., Parvez, A. M., Roslan, F. A. S., Rahim, S. A., Vinayagam, V. D., & Afolabi, H. K. (2021). Moisture content impact on properties of briquette produced from rice husk waste. Sustainability, 13(6), 3069. https://doi.org/10.3390/su13063069
Temmerman, M., Rabier, F., Jensen, P. D., Hartmann, H., & Böhm, T. (2006). Comparative study of durability test methods for pellets and briquettes. Biomass and Bioenergy, 30(11), 964-72. https://doi.org/10.1016/j.biombioe.2006.06.008
Tumuluru, J. S., Wright, C. T., Hess, J. R., & Kenney, K. L. (2011). A review of biomass densification systems to develop uniform feedstock commodities for bioenergy application. Biofuels, Bioproducts and Biorefining, 5(6), 683-707. https://doi.org/10.1002/bbb.324
Vaish, S., Sharma, N. K., & Kaur, G. (2022). A review on various types of densification/briquetting technologies of biomass residues. IOP Conference Series: Materials Science and Engineering, 1228, 012019. https://doi.org/10.1088/1757-899X/1228/1/012019
Vassilev, S. V., Baxter, D., Andersen, L. K., & Vassileva, C. G. (2013). An overview of the composition and application of biomass ash. Part 2: Potential utilisation, technological and ecological advantages and challenges. Fuel, 105, 19-39. https://doi.org/10.1016/j.fuel.2012.10.001
Walozi, R., Onep, G. S., Sanusi, Y. S., Babiker, O. E., Dennison, M. S., Candia, A., & Okurut, S. (2026). Critical review of biomass heterogeneity effects on briquette combustion. Discover Applied Sciences, 8, 309. https://doi.org/10.1007/s42452-025-08212-6
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007). Characteristics of hemicellulose, cellulose and lignin pyrolysis. Fuel, 86(12-13), 1781-8. https://doi.org/10.1016/j.fuel.2006.12.013
- Cover Image
-
- Descargas
- Archivos adicionales
- Publicado
- 2026-11-17
- Sección
- INGENIERÍA DE OPERACIONES Y PROCESOS DE PRODUCCIÓN
- Licencia
-
Derechos de autor 2026 Mucusse, I. F., Mateus, T. H. de A., Magaia, G. C. M., Boanha, B. J., Pereira, N. E. M., & Decius, L.

Esta obra está bajo una licencia internacional Creative Commons Atribución 4.0.
Todas las obras publicadas en la Revista Brasileña de Ingeniería de Producción (BJPE) están bajo la licencia Creative Commons Atribución 4.0 Internacional (CC BY 4.0). Esto significa que: Cualquier persona puede copiar, distribuir, exhibir, adaptar, remezclar e incluso utilizar comercialmente el contenido publicado en la revista; Siempre que se reconozca debidamente a los autores y a BJPE como fuente original; No se requiere permiso adicional para la reutilización, siempre que se respeten los términos de la licencia. Esta política cumple con los principios de acceso abierto, promoviendo la amplia difusión del conocimiento científico. 🔗 Haga clic aquí para acceder a la licencia completa.


2.png)







































