Sustainable biochar briquettes from biomass residues: process conditions and energy potential
- Autores
-
-
Autor
-
Autor
-
Autor
-
Autor
-
Autor
-
Autor
-
- Palavras-chave:
- Briquetes carbonizados, Resíduos lignocelulósicos, Desempenho energético, Análise imediata, Combustíveis sustentáveis
- Resumo
-
This study evaluated the physical, mechanical, and energetic characteristics of carbonized briquettes produced from banana peels, sawdust, and recycled paper, using cassava starch as a binder. Five formulations (F1–F5) were investigated to assess the influence of biomass composition on apparent density, compressive strength, mechanical durability, proximate composition, higher heating value (HHV), and combustion performance. Apparent density ranged from 950 to 1060 kg m⁻³, with F3 and F4 exhibiting compressive strength above 2 MPa and mechanical durability exceeding 95%. HHV ranged from 20.08 to 24.09 MJ kg⁻¹. F4 showed the highest mechanical resistance and durability, whereas F5 exhibited the highest HHV, associated with lower ash content and higher fixed carbon, together with lower apparent fuel consumption and burning rate. These contrasting responses demonstrate that mechanical robustness and gravimetric energy content are not necessarily maximized by the same formulation. The findings provide a basis for optimizing multi-residue carbonized briquettes according to their intended applications and highlight the potential of locally available biomass residues for alternative solid-fuel production.
- Biografia do Autor
- Referências
-
Adeleke, A. E., Mosuro, T. S., & Musa, A. I. (2026). Production of briquettes from the mixture of sawdust, banana peels and palm fronds using cassava starch as binder. Agricultural Engineering International: CIGR Journal, 28(1), 179-88. https://cigrjournal.org/index.php/Ejounral/article/view/9987/4571
Akowuah, J. O., Kemausuor, F., & Mitchual, S. J. (2012). Physico-chemical characteristics and market potential of sawdust charcoal briquette. International Journal of Energy and Environmental Engineering, 3, 20. https://doi.org/10.1186/2251-6832-3-20
Alves, M. B. F., Chaves, R. M., Saraiva, T. dos S., da Silva, E. K. S., & Candeia, R. A. (2022). Physico-chemical and energy profile of briquettes composed of coconut shells, banana peels and/or sawdust. Brazilian Journal of Development, 8(2), 8893-909. https://doi.org/10.34117/bjdv8n2-032
Antal, M. J. & Grønli, M. (2003). The art, science, and technology of charcoal production. Industrial & Engineering Chemistry Research, 42(8), 1619-40. https://doi.org/10.1021/ie0207919
ASTM International. (2019). Standard test method for gross calorific value of coal and coke (ASTM D5865/D5865M-19). ASTM International https://store.astm.org/d5865_d5865m-19.html
ASTM International. (2020). Standard test method for volatile matter in the analysis sample of coal and coke (ASTM D3175-20). ASTM International. https://store.astm.org/d3175-20.html
Bot, B. V., Axaopoulos, P. J., Sakellariou, E. I., Sosso, O. T., & Tamba, J. G. (2023). Economic viability investigation of mixed-biomass briquettes made from agricultural residues for household cooking use. Energies, 16(18), 6469. https://doi.org/10.3390/en16186469
Bot, B. V., Sosso, O. T., Tamba, J. G., Lekane, E., Bikai, J., & Ndame, M. K. (2023a). Preparation and characterization of biomass briquettes made from banana peels, sugarcane bagasse, coconut shells and rattan waste. Biomass Conversion and Biorefinery, 13, 7937-46. https://doi.org/10.1007/s13399-021-01762-w
Demirbas, A. (2004). Combustion characteristics of different biomass fuels. Progress in Energy and Combustion Science, 30(2), 219-30. https://doi.org/10.1016/j.pecs.2003.10.004
Dinesha, P., Kumar, S., & Rosen, M. A. (2019). Biomass briquettes as an alternative fuel: a comprehensive review. Energy Technology, 7(5), 1801011. https://doi.org/10.1002/ente.201801011
Food and Agriculture Organization of the United Nations. (2017). The charcoal transition: greening the charcoal value chain to mitigate climate change and improve local livelihoods. FAO. https://openknowledge.fao.org/handle/20.500.14283/i6935en
Food and Agriculture Organization of the United Nations. FAO. (2018). Improved charcoal technologies and briquette production from woody residues in Malawi: Bioenergy and Food Security (BEFS) case study (FAO Forestry Paper No. 154). FAO. https://openknowledge.fao.org/handle/20.500.14283/ca2087en
Grover, P. D. & Mishra, S. K. (1996). Biomass briquetting: Technology and practices (Field Document No. 46). Food and Agriculture Organization of the United Nations. https://www.fao.org/4/AD579E/AD579E00.htm
Handayani, S. A., Widiati, K. Y., & Putri, F. (2023). Quality of charcoal briquettes from sawdust waste of Ulin (Eusideroxylon zwageri) and coconut shell (Cocos nucifera) based on variations in ratio and particle size. IOP Conference Series: Earth and Environmental Science, 1282, 012049. https://doi.org/10.1088/1755-1315/1282/1/012049
Hassan, L. G., Sani, N. A., Sokoto, A. M., & Tukur, U. G. (2017). Comparative studies of burning rates and water boiling time of wood charcoal and briquettes produced from carbonized Martynia annua woody shells. Nigerian Journal of Basic and Applied Sciences, 25(2), 21-7. https://doi.org/10.4314/njbas.v25i2.4
International Energy Agency. (2025). World Energy Outlook 2025. IEA. https://www.iea.org/reports/world-energy-outlook-2025
International Organization for Standardization. ISO. (2021). Solid biofuelsFuel specifications and classes—Part 6: Graded non-woody pellets (ISO 17225-6:2021). ISO. https://www.iso.org/standard/76093.html
International Organization for Standardization. ISO. (2022). Solid biofuels—Determination of ash content (ISO 18122:2022). ISO. https://www.iso.org/standard/83190.html
International Organization for Standardization. ISO. (2022). Solid biofuels—Determination of moisture content—Part 1: Reference method (ISO 18134-1:2022). ISO. https://www.iso.org/standard/83191.html
Kaliyan, N. & Morey, R. V. (2009). Factors affecting strength and durability of densified biomass products. Biomass and Bioenergy, 33(3), 337-59. https://doi.org/10.1016/j.biombioe.2008.08.005
Kebede, T., Berhe, D. T., & Zergaw, Y. (2022). Combustion characteristics of briquette fuel produced from biomass residues and binding materials. Journal of Energy, 2022, 4222205. https://doi.org/10.1155/2022/4222205
Kirchherr, J., Reike, D., & Hekkert, M. (2017). Conceptualizing the circular economy: An analysis of 114 definitions. Resources, Conservation and Recycling, 127, 221-32. https://doi.org/10.1016/j.resconrec.2017.09.005
Kpalo, S. Y., Zainuddin, M. F., Manaf, L. A., & Roslan, A. M. (2020). A review of technical and economic aspects of biomass briquetting. Sustainability, 12(11), 4609. https://doi.org/10.3390/su12114609
Mekonen, A. G., Berhe, G. G., Desta, M. B., Belete, F. A., & Gebremariam, A. F. (2024). Production and characterization of briquettes from sugarcane bagasse of Wonji Sugar Factory, Oromia, Ethiopia. Materials for Renewable and Sustainable Energy, 13(1), 27-43. https://doi.org/10.1007/s40243-023-00248-1
Mitchual, S. J., Frimpong-Mensah, K., & Darkwa, N. A. (2014). Evaluation of fuel properties of six tropical hardwood timber species for briquettes. Journal of Sustainable Bioenergy Systems, 4(1), 1-9. https://doi.org/10.4236/jsbs.2014.41001
Mwampamba, T. H., Owen, M., & Pigaht, M. (2013). Opportunities, challenges and way forward for the charcoal briquette industry in Sub-Saharan Africa. Energy for Sustainable Development, 17(2), 158-70. https://doi.org/10.1016/j.esd.2012.10.006
Nhuchhen, D. R. & Salam, P. A. (2012). Estimation of higher heating value of biomass from proximate analysis: a new approach. Fuel, 99, 55-63. https://doi.org/10.1016/j.fuel.2012.04.015
Njenga, M., Karanja, N., Karlsson, H., Jamnadass, R., Iiyama, M., Kithinji, J., Sundberg, C., & Jirjis, R. (2013). Charcoal production and strategies to enhance its sustainability in Kenya. Development in Practice, 23(3), 359-71. https://doi.org/10.1080/09614524.2013.780529
Njimou, J. R., Danga, G. M. N., Balike, M., Haman, Z., Ngouyamnsa-Ghenmi, E. M., Njike, R. M. T., Genola, O. B., Talla, A., & Elambo, N. G. (2026). Optimizing calorific value of energy briquettes from agricultural biomass: a novel approach utilizing maize and cassava residues. Waste Disposal & Sustainable Energy, 8, 89-103. https://doi.org/10.1007/s42768-025-00123-4
Nonsawang, S., Sokudlor, N., Sanchumpu, P., Suaili, W., Khaeso, K., Oupathum, C., Sethanan, K., & Laloon, K. (2026). Insights into the co-utilization of cassava industry waste and invasive woody biomass for charcoal briquettes production. Carbon Resources Conversion. Advance online publication. https://doi.org/10.1016/j.crcon.2026.100416
Nwankwo, C. I., Onuegbu, T. U., Okafor, I. F., & Igwenagu, P. C. (2023). Utilization of agricultural waste in the production of charcoal briquette blend as alternative source of energy. IOP Conference Series: Earth and Environmental Science, 1178, 012015. https://doi.org/10.1088/1755-1315/1178/1/012015
Olugbade, T. O., Ojo, O. T., & Mohammed, T. I. (2019). Influence of binders on combustion properties of biomass briquettes: a recent review. BioEnergy Research, 12(2), 241-59. https://doi.org/10.1007/s12155-019-09973-w
Onukak, I. E., Mohammed-Dabo, I. A., Ameh, A. O., Okoduwa, S. I. R., & Fasanya, O. O. (2017). Production and characterization of biomass briquettes from tannery solid waste. Recycling, 2(4), 17. https://doi.org/10.3390/recycling2040017
Python Software Foundation. (2023). Python 3.11 documentation. https://docs.python.org/3.11/
Ramdas, V., Njokweni, S. G., Letsoalo, P., Motaung, S., & Ramchuran, S. O. (2025). Bio-coal briquetting as a potential sustainable valorization strategy for fine coal: a South African perspective in a global context. Energies, 18(14), 3746. https://doi.org/10.3390/en18143746
Rawat, S. & Kumar, S. (2022). Critical review on processing technologies and economic aspect of bio-coal briquette production. Preparative Biochemistry & Biotechnology, 52(8), 855-71. https://doi.org/10.1080/10826068.2021.2001754
Saeed, A. A. H., Harun, N. Y., Bilad, M. R., Afzal, M. T., Parvez, A. M., Roslan, F. A. S., Rahim, S. A., Vinayagam, V. D., & Afolabi, H. K. (2021). Moisture content impact on properties of briquette produced from rice husk waste. Sustainability, 13(6), 3069. https://doi.org/10.3390/su13063069
Temmerman, M., Rabier, F., Jensen, P. D., Hartmann, H., & Böhm, T. (2006). Comparative study of durability test methods for pellets and briquettes. Biomass and Bioenergy, 30(11), 964-72. https://doi.org/10.1016/j.biombioe.2006.06.008
Tumuluru, J. S., Wright, C. T., Hess, J. R., & Kenney, K. L. (2011). A review of biomass densification systems to develop uniform feedstock commodities for bioenergy application. Biofuels, Bioproducts and Biorefining, 5(6), 683-707. https://doi.org/10.1002/bbb.324
Vaish, S., Sharma, N. K., & Kaur, G. (2022). A review on various types of densification/briquetting technologies of biomass residues. IOP Conference Series: Materials Science and Engineering, 1228, 012019. https://doi.org/10.1088/1757-899X/1228/1/012019
Vassilev, S. V., Baxter, D., Andersen, L. K., & Vassileva, C. G. (2013). An overview of the composition and application of biomass ash. Part 2: Potential utilisation, technological and ecological advantages and challenges. Fuel, 105, 19-39. https://doi.org/10.1016/j.fuel.2012.10.001
Walozi, R., Onep, G. S., Sanusi, Y. S., Babiker, O. E., Dennison, M. S., Candia, A., & Okurut, S. (2026). Critical review of biomass heterogeneity effects on briquette combustion. Discover Applied Sciences, 8, 309. https://doi.org/10.1007/s42452-025-08212-6
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007). Characteristics of hemicellulose, cellulose and lignin pyrolysis. Fuel, 86(12-13), 1781-8. https://doi.org/10.1016/j.fuel.2006.12.013
- Cover Image
-
- Arquivos adicionais
- Publicado
- 17.11.2026
- Seção
- ENGENHARIA DE OPERAÇÕES E PROCESSOS DA PRODUÇÃO
- Licença
-
Direitos autorais (c) 2026 Mucusse, I. F., Mateus, T. H. de A., Magaia, G. C. M., Boanha, B. J., Pereira, N. E. M., & Decius, L.

Este trabalho está licenciado sob uma licença Creative Commons Attribution 4.0 International License.
Qualquer pessoa pode copiar, distribuir, exibir, adaptar, remixar e até utilizar comercialmente os conteúdos publicados na revista; Desde que sejam atribuídos os devidos créditos aos autores e à BJPE como fonte original; Não é exigida permissão adicional para reutilização, desde que respeitados os termos da licença. Esta política está em conformidade com os princípios do acesso aberto, promovendo a ampla disseminação do conhecimento científico. 🔗 CC BY 4.0


2.png)








































