Revisão sobre tecnologias avançadas para a recuperação de alumínio de resíduos de embalagens cartonadas usando pirólise

Authors

DOI:

https://doi.org/10.47456/bjpe.v7i1.34583

Keywords:

Embalagens Cartonadas, Pirólise, Recuperação de Alumínio, Leito de Jorro

Abstract

A pirólise é uma tecnologia verde que permite separar o alumínio do polietileno das embalagens Tetra Pak. Essa alternativa pode ser utilizada para reduzir o impacto ambiental decorrente da destinação inadequada desses resíduos modernos. Além disso, a reciclagem permite recuperar materiais de alto valor agregado. Para a recuperação de alumínio e óleos parafínicos de resíduos de embalagens cartonadas, este artigo de revisão visa destacar os avanços na ciência e na tecnologia para a recuperação de alumínio de embalagens cartonadas. Dentre os reatores analisados, os leitos de jorro e os leitos fluidizados podem ser apontados como novas oportunidades e grandes sucessos do setor nos próximos anos. Em relação ao potencial econômico, dois fatores apontam a pirólise de resíduos de embalagens cartonadas como uma técnica promissora: o valor agregado dos materiais reciclados e a economia de energia do processo. Com base na análise econômica, a pirólise tem um potencial econômico positivo de 190,5 US$/por tonelada de produto. Quando comparada ao processo tradicional de produção de alumínio, a pirólise pode economizar 0,745 MWh por cada tonelada de embalagem cartonada recuperada. No que diz respeito à rentabilidade do processo, a pirólise por plasma tem uma relação de caixa acumulada de 3,27 milhões e uma taxa de retorno do investimento de 2,04%, mostrando-se um investimento atraente.

Downloads

Download data is not yet available.

Author Biographies

Diunay Zuliani Mantegazini, Universidade Federal do Espírito Santo - UFES/CEUNES

Doctoral student in Mechanical Engineering at Universidade Estadual Paulista - UNESP. Specializing in Improvement in Teacher Training for Distance Education by the Federal Institute of Espírito Santo - IFES. Master in Energy from the Federal University of Espírito Santo - UFES. Graduated in Mechanical Engineering from Faculdade Norte Capixaba de São Mateus - MULTIVIX. Experience in mechanical engineering, with emphasis on agricultural machinery projects.

Thiago Padovani Xavier, Universidade Federal do Espírito Santo - UFES/CEUNES

PhD in Chemical Engineering from the Federal University of Uberlândia (2016), with a master's degree in Chemical Engineering from the Federal University of Uberlândia (2011) and a degree in Chemistry from the Federal University of Uberlândia (2003). He is currently an Adjunct Professor at the Department of Engineering and Technology at the Federal University of Espírito Santo, since 2012, working on issues related to engineering with regard to technological research and staff training in the management area.

Marcelo Silveira Bacelos, Universidade Federal do Espírito Santo - UFES/CEUNES

Graduated in Chemical Engineering from the Federal University of Rio Grande Foundation - FURG- 1999. Master in Chemical Engineering from the Federal University of São Carlos-UFSCar in 2002. Doctor in Chemical Engineering from UFSCar in 2006. Professor at the Federal University of Espírito Santo - UFES since 2008; Coordinator of the Graduate Program in Energy (PPGEN) 2013-2015. Full Member of the Advisory Board of FAPES(2010-2014). Postdoctoral fellow at Illinois Institute of Technology, Chicago, USA -2016. Permanent member of PPGEN, Master in ENERGY, Energy efficiency research line. Has experience in Industrial Operations and Equipment for Chemical Engineering. Mainly works in multiphase flow analysis applied to spouted and fluidized bed reactors.

References

ABAL, (2010). Associação Brasileira do Alumínio – ABAL.

Alvarenga, L. M., Xavier, T. P., Barrozo, M. A. S., Bacelos, M. S., & Lira, T. S. (2016). Determination of activation energy of pyrolysis of carton packaging wastes and its pure components using thermogravimetry. Waste management, 53, 68-75. https://doi.org/10.1016/j.wasman.2016.04.015.

Artetxe, M., Lopez, G., Amutio, M., Elordi, G., Olazar, M., & Bilbao, J. (2010). Operating conditions for the pyrolysis of poly-(ethylene terephthalate) in a conical spouted-bed reactor. Industrial & engineering chemistry research, 49(5), 2064-2069. https://doi.org/10.1021/ie900557c.

Bacelos, M. S., & Freire, J. T. (2006). Stability of spouting regimes in conical spouted beds with inert particle mixtures. Industrial & engineering chemistry research, 45(2), 808-817. https://doi.org/10.1021/ie050633s.

Barcelos, K. M., Almeida, P. S., Araujo, M. S., Xavier, T. P., Santos, K. G., Bacelos, M. S., & Lira, T. S. (2020). Particle segregation in spouted bed pyrolysis reactor: Sand-coconut shell and sand-cocoa shell mixtures. Biomass and Bioenergy, 138, 105592. https://doi.org/10.1016/j.biombioe.2020.105592.

Butler, E., Devlin, G., & McDonnell, K. (2011). Waste polyolefins to liquid fuels via pyrolysis: review of commercial state-of-the-art and recent laboratory research. Waste and biomass valorization, 2(3), 227-255.

CEMPRE, (2019). Embalagens Longa Vida, CEMPRE – Compromisso empresarial para a reciclagem.

Cervantes-Reyes, A., Núñez-Pineda, A., Barrera-Díaz, C., Varela-Guerrero, V., Martínez-Barrera, G., & Cuevas-Yañez, E. (2015). Solvent effect in the polyethylene recovery from multilayer postconsumer aseptic packaging. Waste Management, 38, 61-64. https://doi.org/10.1016/j.wasman.2015.01.034.

Curtzwiler, G. W., Schweitzer, M., Li, Y., Jiang, S., & Vorst, K. L. (2019). Mixed post-consumer recycled polyolefins as a property tuning material for virgin polypropylene. Journal of Cleaner Production, 239, 117978. https://doi.org/10.1016/j.jclepro.2019.117978.

Freitas, T. M., Arrieche, L. S., Ribeiro, D. C., Gidaspow, D., & Bacelos, M. S. (2017). CFD analysis of fluidized beds using wastes from post-consumer carton packaging. Chemical Engineering and Processing: Process Intensification, 111, 89-100. https://doi.org/10.1016/j.cep.2016.12.002.

Geldart, D. (1973). Types of gas fluidization. Powder technology, 7(5), 285-292.

Haydary, J., Susa, D., & Dudáš, J. (2013). Pyrolysis of aseptic packages (Tetra Pak) in a laboratory screw type reactor and secondary thermal/catalytic tar decomposition. Waste Management, 33(5), 1136-1141. https://doi.org/10.1016/j.wasman.2013.01.031.

Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017). Thermochemical routes for the valorization of waste polyolefinic plastics to produce fuels and chemicals. A review. Renewable and Sustainable Energy Reviews, 73, 346-368.

Melo, J. L. Z., Bacelos, M. S., Pereira, F. A. R., Lira, T. S., & Gidaspow, D. C. F. D. (2016). CFD modeling of conical spouted beds for processing LDPE/Al composite. Chemical Engineering and Processing: Process Intensification, 108, 93-108. https://doi.org/10.1016/j.cep.2016.07.011.

Neves, F. L. (1999). Reciclagem de embalagens cartonadas Tetra Pak. O Papel, 53(2), 38-45.

Olazar, M., San Jose, M. J., Penas, F. J., Aguayo, A. T., & Bilbao, J. (1993). Stability and hydrodynamics of conical spouted beds with binary mixtures. Industrial & engineering chemistry research, 32(11), 2826-2834. https://doi.org/10.1021/ie00023a053.

Pedroso, M. C., & Zwicker, R. (2007). Sustentabilidade na cadeia reversa de suprimentos: um estudo de caso do Projeto Plasma. Revista de Administração-RAUSP, 42(4), 414-430.

San Jose, M. J., Olazar, M., Penas, F. J., & Bilbao, J. (1994). Segregation in conical spouted beds with binary and ternary mixtures of equidensity spherical particles. Industrial & engineering chemistry research, 33(7), 1838-1844. https://doi.org/10.1021/ie00031a025.

Tetra Pak, (2018). Post-consumer recycling of used carton packages.

Turton, R., Bailie, R. C., Whiting, W. B., & Shaeiwitz, J. A. (2008). Analysis, synthesis and design of chemical processes. Pearson Education.

Żukowski, W., & Berkowicz, G. (2019). The combustion of polyolefins in inert and catalytic fluidised beds. Journal of Cleaner Production, 236, 117663. https://doi.org/10.1016/j.jclepro.2019.117663.

Downloads

Published

2021-03-31

How to Cite

Mantegazini, D. Z., Neves, F. L., Xavier, T. P., & Bacelos, M. S. (2021). Revisão sobre tecnologias avançadas para a recuperação de alumínio de resíduos de embalagens cartonadas usando pirólise. Brazilian Journal of Production Engineering, 7(1), 117–129. https://doi.org/10.47456/bjpe.v7i1.34583

Issue

Vol. 7 No. 1 (2021): Número Regular (Janeiro - Março)

Section

ENERGY

License

Copyright (c) 2021 Brazilian Journal of Production Engineering - BJPE

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Atribuição-NãoComercial-CompartilhaIgual
CC BY-NC-SA

This license lets others remix, adapt, and build upon your work non-commercially, as long as they credit you and license their new creations under the identical terms.

Most read articles by the same author(s)

1 2 > >>